基于单片机的大棚监测系统的设计.rar

  • 需要金币1000 个金币
  • 资料包括:完整论文
  • 转换比率:金钱 X 10=金币数量, 即1元=10金币
  • 论文格式:Word格式(*.doc)
  • 更新时间:2013-11-12
  • 论文字数:11930
  • 当前位置论文阅览室 > 毕业设计 > 设计说明 >
  • 课题来源:(你好,学长)提供原创文章

支付并下载

摘要:从古至今,我国一直就是一个农业大国,加上庞大的人口数量,给作物产量提出了很高的要求,大棚技术的产生顺利地解决了这个问题。对于大棚种植而言,棚内环境的监测是农民最难解决也是最麻烦的问题。随着科学技术的发展,农民对大棚的监测越来越趋向智能化。

   本课题使用AT89S52型号的单片机作为主要元件来设计一款大棚监测系统,采用DHT11温湿度传感器、BH1750光强度传感器来实现对大棚内温湿度、光强度的监测,并通过12864显示屏进行实时的显示,利用继电器的动作来模拟现实中相应的应对措施,用发光二极管的亮暗,来判断继电器是否动作。在硬件设计方面,分别对最小系统电路、传感器电路、按键电路、显示电路、报警电路、继电器电路进行了详细介绍。还详细介绍了设计中应用到的主要芯片的性能和特点,包括AT89S52、12864液晶屏、传感器等。在软件设计方面,采用C语言,可读性强,易于修改。经调试,该系统能够完成预期的基本功能。

关键词  AT89S52;BH1750;DHT11;12864液晶;监测

 

Abstract:Since ancient times China is a large agricultural country, with a huge population, put forward a very high request to the crop yield, produce greenhouse technology is successfully solved this problem. For greenhouse planting, greenhouse environment monitor is the most difficult to solve the most troublesome problem. With the development of science and technology, more and more farmers begin to monitor greenhouse with intelligent.

   This design uses the AT89S52 model as the main element to design a greenhouse monitoring system, with DHT11 temperature and humidity sensor and BH1750 light sensor to realize the monitoring of greenhouse temperature and humidity, light intensity, and real-time display by the 12864LCD display screen. In the aspect of hardware design, mainly on the clock oscillating circuit, reset circuit, keyboard circuit, display circuit, sensor circuit, alarm circuit is introduced in detail. Also introduced the properties and characteristics of the main chip to design applications, including AT89S52, 12864LCD, sensor element etc, In software design, using C language, it is easy to read and modify. After debugging, the system can complete the basic functions of the expected.

Keywords    AT89S52    BH1750   DHT11   12864LCD   monitor

 

   中国作为发展中国家,虽然国土广泛,但可耕面积有限,加上庞大的人口数量,必须要求作物的高产。在这种情况下,光靠提升可耕地的面积显然是低效而且低收益的,必须用新的方法来提高单位面积的亩产量,大棚技术可以在很大程度上满足这种需求。近代随着科技的发展,大棚技术也得到了很大的进步,传感器技术、单片机技术也被应用进来。大棚内的温度、湿度、光强等等条件对作物的生长起到了关键的作用。本课题设计出了一种以单片机作为控制中心,通过传感器对大棚内的温度、湿度、光强进行实时的监测且显示,同时可以手动设置各项数据的上下限,一旦检测出不满足设定要求的数据,蜂鸣器立即报警,同时继电器动作模拟现实中的对应措施。例如当光强过高或者过低时,继电器模拟现实对应的光照灯的关和开。该设计趋向于智能化、节能化,具有测量精度高,安装简单方便,性价比高,等等优点。