125t顶吹转炉的水力学模型实验研究_冶金工程.doc

  • 需要金币1000 个金币
  • 资料包括:完整论文
  • 转换比率:金钱 X 10=金币数量, 即1元=10金币
  • 论文格式:Word格式(*.doc)
  • 更新时间:2014-06-09
  • 论文字数:8562
  • 当前位置论文阅览室 > 原创论文 > 文献综述 >
  • 课题来源:(sana0722)提供原创文章

支付并下载

摘  要:本文是利用水模拟钢液体,空气模拟氧气,由转炉顶部垂直插入的氧枪将空气吹入以水模拟的钢液熔池中。研究液面高度,枪位变化,气流量等因素的变化来测试氧枪对液面喷溅量和混匀时间的影响,通过实验研究,结果表明在当模型顶吹气体流量≥28m³/h时,枪位和流量变化对熔池均混时间影响较小;熔池的喷溅量随枪位降低和顶吹气体流量的增加而增加;当气体流量为32m³/h时,熔池的喷溅量较大。

关键词:氧气转炉; 顶枪流量; 枪位; 均混时间; 冲击深度

 

ABSTRACT:This paper was to use water simulation steel liquid oxygen from air simulation of converter, the top vertical insert oxygen lance will air blowing water simulation of liquid steel in the pool. Research liquid surface height, gun a change, factors such as gas flow changes to the test of liquid surface oxygen lance spillage effect of quantities and blending time, through experiment and research, the results showed that the when model of gas flow rate (28m ³ / h p, gun bits and flow changes of molten pool are less affected mixing time; Pool with gun a spillage of quantity of gas flow rate reduced and top-blown increases; When the gas flow ³ / h, 32m spillage of molten pool large quantities.

Keywords: basic oxygen; top gun flow; gun bits ;are mixing time ; impact depth